Machined from 12lb tooling foam.
Once I had all of the surface worked out I wanted to have the stringers on top curve or sweep in a way that is directly related to the existing shape.
I started each one at one end and moved across slowly.
Monday, December 21, 2015
1848 Stage Coach Wood Model Kit by Latina (Roof Panel)
Wishing to have a more attractive roof panel I surfaced a subtle curve into the top.
Machined from 12lb tooling foam.
In order to do two - sided millings you need a referance point that is the 1/8 hole in the center, this makes it very easy to find X & Y 0.
Once I had all of the surface worked out I wanted to have the stringers on top curve or sweep in a way that is directly related to the existing shape.
I started each one at one end and moved across slowly.
I also included the holes for the railing in the milling operation.
I used the under coat spray (assuming the roof was tarred? And tung-oil finish on the sides and stringers.
Machined from 12lb tooling foam.
Once I had all of the surface worked out I wanted to have the stringers on top curve or sweep in a way that is directly related to the existing shape.
I started each one at one end and moved across slowly.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment